The window itself
becomes the screen
A 1.8 mm transparent LED that sits flush against the glass.
Even installed, the view through the window stays visible — an Invisible LED with over 80% transmittance.
Invisible transparent LED,
here is what it is
It is an ultra-thin transparent LED screen bonded flush to the glass surface.
With evenly spaced pixels and a smooth surface bond, it shows a crisp image while what lies behind it still shows through.
It mounts to the front or back of the glass without touching the building's structure.
Ideal for spaces that need an advertising screen while keeping the openness — shop windows, display windows, media façades.
The method won the 2023 German iF Design Award, often called the Oscar of design.
It suits
spaces like these
the window becomes an advert
into a large screen
with the product showing through
that leaves the space intact
any shape
at events and showrooms
Why Invisible
LED
Three series
by mounting method
Glass-mounted, ceiling-hung, mobile stand — pick what fits the space.
Invisible touring
system
The same Invisible built for permanent installation, configured for events and tours.
Assemble 1 m × 1 m modules to any size; quick-lock frames and one-touch connectors let you raise it and fold it fast.
Concerts and stages, curved media walls, retail and showrooms — real applications.
Indoor stages and performances, exhibitions, showrooms, roadshows, pop-up stores, commercial spaces — installed and struck for every event, then moved in road cases. The transparency stays the same.
※ No water or dust rating (no IP class) — not suited to permanent outdoor use exposed to rain or dust.
Transparent LED
in use
Hanwha Momentum Changwon · Innovation Hall PERMANENT
At the Hanwha Momentum Changwon factory, transparent mesh LED was permanently ceiling-hung in the Innovation Hall and Prestige Lounge. Stairs and walkways stay open and unblocked while brand logos and video float in mid-air — media that divides space without building a wall.
On site, for real
A site where it was mounted directly onto the shop window.
Even during installation, the street behind the screen shows straight through.
Glass façades FACADE
Mounted on building glass as a large media façade. After installation the city beyond the glass still shows through.
Content and staging CONTENT
Put any content on transparency and it layers over the space behind it, gaining depth.
Exhibitions, showrooms, spaces SPACE
Structure and principle STRUCTURE
Installation footage
Installed on site and actually playing content. Even with an advert running, the view through the glass remains.
How it hangs on a glass wall — installation video
Two methods in 3D: hanging the bracket on the frame, or fixing it to the glass.
Power boxes, signal and LAN cabling are shown too.
Real installations on building glass and shop display windows
Invisible LED installation guide — 11 steps
The actual sequence for hanging the screen from the top frame of a glass curtain wall.
Hang the modules, join them with clips, then connect power and signal.
01Fix the mounting bracket to the top frame
02Hang each module on the bracket and fasten with screws
03Hang the modules side by side, one by one
04Join the modules with clips (about 10 cm apart vertically)
05Connect the signal ribbon cables
06Fix the power box and connect DC power
07Daisy-chain the boxes with LAN cables
08Connect the AC power cable
09Connect the controller to a PC and configure
10Close the frame with the trim plate
11Light it up — the window becomes a screen
Photos for installation reference.
Specifications
M series, glass-mounted
| Item | M2 | M3 | M6 | M10 |
|---|---|---|---|---|
| Pixel pitch (mm) | 2.5 | 3.91 | 6.25 | 10 |
| Pixel density (dots/m²) | 160,000 | 65,536 | 25,600 | 10,000 |
| Transmittance | 70% | 80% | 90% | 85% |
| Brightness (cd/m²) | ≥1,200 | ≥3,000 | ≥5,000 | ≥4,000 |
| Module weight (kg) | 1.63 | 1.6 | 1.6 | 1.2 |
* The mobile A series and hung P series come in separate formats, advised on request.
Figures may vary with the site and quantity.
How does it differ
from Transfer LED?
| Item | Invisible LED | Transfer LED |
|---|---|---|
| Structure | Perforated board type | Louvre (bar) type |
| Transparency | Highest (80%+) | Moderate |
| Rear face | Clean | Framework visible |
| Installation | Bonded to glass (permanent) | Light and fast |
| Cost | Premium | Less than half |
| Main use | Permanent store and exhibition installs | Concert and event rental |
For permanent store installation, the highest transparency and a clean rear face — Invisible LED.
For concert and event rental, fast installation and budget efficiency — Transfer LED.
Go to Transfer LED →Transparent LED for event and concert rental
Product documents
to download
See the specifications and introduction to Invisible transparent LED as a PDF.
Frequently asked questions
Does it block the view out of the window?
Transmittance is over 80%, so the view through the glass remains after installation.
The store keeps its openness and only the advertising screen is added.
Does the glass have to be removed or the structure altered?
No.
It bonds flush to the front or back of the existing glass without touching the building's structure.
Is the screen readable in broad daylight?
Brightness around 4,000 nits and 9,000:1 contrast keep it crisp in daylight.
It is used on exterior advertising faces as well.
Can it follow curved or unusual glass?
At 1.8 mm it is flexible enough to follow a curve without a seam, and it can be cut to the size you need.
How do I choose the pixel pitch?
For interiors viewed up close we recommend the dense M2 and M3 (high resolution); for exterior walls viewed from a distance, M6 and M10 (high transmittance).
We advise according to the viewing distance.
Is rental available? And a quote?
Both permanent installation and rental are possible.
Tell us the location, the glass size (width × height) and the purpose, and we will send a tailored quote.
Transparent LED —
VIEW MEDIA installs it too
Just tell us the location, the glass size and the purpose.
We will send a quote with a fitting configuration right away.